Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x155.6mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.1mm

Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic Brown Transmission Distance: 1.4
PLA PolyTerra Earth Brown Transmission Distance: 0.5
PLA Tpoimns Flesh Transmission Distance: 7.5
PLA BambuLab Matte Scarlett Red Transmission Distance: 1.9
PLA BambuLab Matte Desert Tan Transmission Distance: 0.4
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 7 unique filaments

Swap Instructions:
Start with Charcoal Black
At layer #10 (0.52mm) swap to Brown
At layer #14 (0.68mm) swap to Earth Brown
At layer #17 (0.8mm) swap to Flesh
At layer #26 (1.16mm) swap to Scarlett Red
At layer #29 (1.28mm) swap to Desert Tan
At layer #40 (1.72mm) swap to White for the rest.