Bambu QR-Code sticker for third party textured PEI-plate
Copyright Claim
Bambu QR-Code sticker for third party textured PEI-plate
Boost
49
100
24
Print Profile(2)
0.08mm layer, 2 walls, 15% infill
Designer
20 min
1 plate
PLA Ironing white base color for higher contrast
29 min
1 plate
Boost
49
100
24
0
273
153
Released
Description
A small and thin sticker to glue on third party textured PEI plates to avoid annoying error messages with the x1c
I recommend using ASA/ABS/PETG fpr this to avoid any deformation wihle printing on a hot bed
Comment & Rating (24)
All
Print Profile
PLA Ironing white base color for higher contrast
In have some Pixel errors Burg i think IT results of my 0.4mm nozzle.
The designer has replied
0
Reply
yeah, i printed with 0.2mm nozzle^^
0
Reply
I designed it to be printable with a .4 nozzle.
have you checked your temperature and nozzle?
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
It came out beautiful.
Update: 7 Jan 2024 The problem is the backwards unless I’m doing something completely wrong and crazy, which are all a strong possibility, but it’s backwards. unless and you guys let me know it doesn’t matter where the QR code as long as it’s there, but based on what I’ve seen from other print profiles, and the people that make QR location attachments makes me say that that’s not possible anyway appreciate any update or insight that I’m missing please
(Edited)
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
pla on left worked well, abs on right seems messy
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
it works
0
Reply
So what am I doing wrong or am I crazy and I try to put it on mine it’s backwards put QR code on the far left-hand side if you guys are saying it’s working clearly I’m doing something wrong I guess and reply would be appreciated
0
Reply
Replying to @brenden.mulhern
same for me it worked and now not working anymore. this one is working https://makerworld.com/fr/models/103432#profileId-114584
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
worked well
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
tried to scale it bigger but then sides broke when bending. but very good design when printed originally
0
Reply
Doesn't work anymore for me with PEI Textured plate, had to print a new one frome here:
https://makerworld.com/fr/models/103432#profileId-114584
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
this was a great file
0
Reply
Print Profile
0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
PLA Ironing white base color for higher contrast
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld