Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.3mm
Filaments Used:
PLA BambuLab Matte Charcoal Black Transmission Distance: 0.3
PLA PolyTerra Earth Brown Transmission Distance: 0.5
PLA BambuLab Matte Dark Red Transmission Distance: 0.3
PLA BambuLab Matte Mandarin Orange Transmission Distance: 2.8
PLA Sunlu Pure Yellow Transmission Distance: 5.6
PLA BambuLab Matte White Transmission Distance: 3.5
This print uses 6 unique filaments
Swap Instructions:
Start with Charcoal Black
At layer #10 (0.52mm) swap to Earth Brown
At layer #28 (1.24mm) swap to Dark Red
At layer #29 (1.28mm) swap to Mandarin Orange
At layer #30 (1.32mm) swap to Pure Yellow
At layer #47 (2mm) swap to White
At layer #55 (2.32mm) swap to Charcoal Black for the rest.