Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm

The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.4mm and the Actual Depth is 2.3mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PETG JAYO Black Transmission Distance: 0.3
    PETG JustMaker Brown Transmission Distance: 1.5
    PETG Sunlu Red Transmission Distance: 7.5
    PETG TPOIMNS Yellow Transmission Distance: 6.5
    PETG JAYO White Transmission Distance: 6
This print uses 6 unique filaments

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #39 (1.68mm) swap to Black
    At layer #43 (1.84mm) swap to Brown
    At layer #44 (1.88mm) swap to Red
    At layer #46 (1.96mm) swap to Yellow
    At layer #51 (2.16mm) swap to White for the rest.