HueForge Charizard Keychain
HueForge Charizard Keychain
Print Profile(2)
Description
This file was made with Hueforge. I made this as a large backpack keychain however also have another file without the keyhole added.
If you resize it, make sure the thickness does not change or the colors will not layer correctly.
*****This was printed with 1 AMS unit but it is 5 total color changes so you will need to switch out the last blue that is shown in the slicer for White after you finish with the blue on layer 11. *****
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA Amolen Temp Color changing Blue Transmission Distance: 4
PLA Amolen Temp Color changing Blue Transmission Distance: 4
PLA Amolen Temp Color changing Orange Transmission Distance: 7.5
PLA Sunlu Red Transmission Distance: 1.5
PLA Sunlu Yellow Transmission Distance: 6.5
PLA Sunlu White Transmission Distance: 5
Swap Instructions:
Start with Blue
At layer #7 (0.64mm) swap to Blue
SWITCH BLUE OUT FOR WHITE ON THE AMS.
At layer #11 (0.96mm) swap to Orange
At layer #13 (1.12mm) swap to Red
At layer #16 (1.36mm) swap to Yellow
At layer #21 (1.76mm) swap to White for the rest.
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
