I store my nozzles on a magnetic wall mount, and I wanted to cap them so dust/debris in my shop doesn't get into the heatbreak. These caps with nozzle size labels make it easier to tell which nozzle is the size I'm looking for, while preventing debris from entering the heatbreak when the nozzle is wall mounted or stored in the open.

Features:

• Snug slide on fitment/removal
• Prevent dust/debris from entering heatbreak when stored in the open (wall mounted, on shop bench etc)
• Ergonomic design for easy removal.
• Multicolor labels for all nozzle sizes.

Print Profile Notes:

Nozzle: Suggest 0.4mm nozzle for precision fit
Wall Loops: 5 wall loops on 0.4mm nozzle, 0.6mm nozzle not recommended due to decreased layer adhesion.
Layer Height: Suggest 0.16mm or 0.20mm to maximize strength (0.16mm default)
Infill: 15% gyroid (no infill used for this model)
Brim: 3mm brim
Material: PLA or PETG
Color: Any
Print Orientation: Print with hole facing up.
Supports: None
3d Printers: Should be printable on any printer.