Keyrambit Keychain by Tobkar_ by Tobkar_

Tobkar_

Fashion>Rings

Print Profile(3)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.2mm layer, 3 walls, 100% infill

Designer

21 min

1 plate

4.9(11)

10 Keyrambits | A1 Mini

Designer

2.4 h

1 plate

5.0(1)

0.2mm layer, 2 walls, 100% infill 4 pcs

57 min

1 plate

Boost

148

Released

Description

Keyrambit Keychain

This is a keychain spinner inspired by the karambit knife. It requires a 6803 (61803) bearing to function. It is a great way to fidget and relieve stress, and it can also be used as a self-defense tool.

Commercial Use

This model is licensed under the Creative Commons Attribution-ShareAlike 4.0 International license. This means that you are free to use and remix it for commercial purposes, as long as you give credit to the original author (me) and provide a link back to this page.

Printing Instructions

This model is designed to be printed on a 3D printer with a minimum bed size of 50x50x50mm. It is recommended to use a layer height of 0.2mm or less for best results.

How to Assemble

Once you have printed the model, you will need to insert a 6803 (61803) bearing into the center hole. You can then attach the spinner to your keychain using the included hole.

Additional Notes

This model is not intended to be used as a weapon.
Use caution when spinning the spinner, as it can generate high speeds.
Keep the spinner out of reach of children.

Additional resources:

6803 (61803) bearing on Amazon
6803 (61803) bearing on Allegro

Comment & Rating (37)

@Robert_Polska

Print Profile

0.2mm layer, 3 walls, 100% infill

Fajna struktura wykończeniowa.

The designer has replied

@user_4047618593

Z ciekawości na jakiej drukarce robiłeś. Ja dopiero zaczynam i coś mi nie wychodzi. Drukarkę jaką mam to anycubic kobra 2 pro. w załączniku zdjęcia.

@Robert_Polska

Replying to @user_4047618593 :

Bambu A1 mini. Widac ze za dużo filamentu podaje drukarka. Nie masz skalibrowanego extrudera.

@tobkar_

Replying to @user_4047618593 :

Spróbuj na pierwsza i ostatnią warstwę ustawić "hilbert`s curve"

@user_3234397222

Print Profile

0.2mm layer, 3 walls, 100% infill

Awesome print. 5/5 for it's easiness and simplicity.

The designer has replied

@tobkar_

thanks for opinion

@thekross

Print Profile

0.2mm layer, 3 walls, 100% infill

printed few with no issues, thanks

The designer has replied

@tobkar_

looks very good!

@vk3dprinting

Print Profile

0.2mm layer, 3 walls, 100% infill

looks very good!

The designer has replied

@tobkar_

Thanks

@druku3d.expert

Print Profile

0.2mm layer, 3 walls, 100% infill

Great project

@Toprototyp

Print Profile

0.2mm layer, 3 walls, 100% infill

The designer has replied

@tobkar_

good print

@user_3789605155

Can i sell it on allegro?

The designer has replied

@tobkar_

Yes, :) You only have to provide a link to this page.

@user_1861422957

auch in De?

@tobkar_

Replying to @user_1861422957 :

yes, you can sell it in DE. You only have to give link to this page | Ja, du kannst es in DE verkaufen. Du musst nur einen Link zu dieser Seite geben.