Intro

Desktop stand for Hollow Knight miniature. Fully compatible with Fangamer Hollow Knight mini figurine.

You may want to print weapons in two colors as I did; profile for this is included!

Files

Consists of 3 parts: base, fence and weapons. You sould print all of them separately.

All necessary profiles and STL files are included. The profiles are “ready-to-print” and configured properly.

Print instructions (manual slice&print)

I printed in PLA with 0.4mm nozzle.

Please note, %% values are approximate.

Base

• 30% infill or higher
• decrease first layer speed

Fence

• decrease first layer speed by 40%
• decrease other layers speed by 20%
• use 2 skirt loops

Weapons

• 30% infill or higher
• enable supports with Top Z of 0.1mm and a rectangular pattern
• decrease first layer speed by 40%
• decrease support speed by 40%
• add 2 skirt loops
• use brim with 3mm width and type set to “outer brim only”