Stitch Hehagon wall art

Copyright Claim

Stitch Hehagon wall art

Boost
9
11
1

Print Profile(1)

All
P1P
P1S
X1
X1 Carbon
X1E
A1

0.2mm layer, 2 walls, 15% infill
0.2mm layer, 2 walls, 15% infill
Designer
2.4 h
1 plate
4.0(1)

Open in Bambu Studio
Boost
9
11
1
1
7
3
Released

Description

Hi all,

 

i'm back with a wall art wit open top layer design. This desings are made for printin on all printers.

More of this Disney hexagon are coming soon.

 

 

Instruction for the open top layer: The screenshots are from a other model but the steps ar the same, only some parameters changes.

The settings are set correctly in the 3mf file. Just open the file in bambu studio, choose your printer and do not override the settings. Slice and print

PAY ATTENTION IF YOU USE 1 AMS; This is a 5 color print, if you have one AMS, you need swap a spool during print. Best is to choose black and set the last color white on the same slot as the black

  • In global tab choose the Octogram Spiral infill en enable supports
  • Go the the object tab; i used the Height range modifier (Right click on the object in the object tab)

That way Pikachu closed top layer

 

Choosing other infill is also possible (Archimedean Chord did'nt work for me)

 

 

  • Set the layes you want to change; in this case it's 0 to 15 mm

 

 

  • In the object tab set top layers to 0 and infill to Octogram Spiral

 

 

Dont forget to do the color swaps. PAY ATTENTION IF YOU USE 1 AMS; This is a 5 color print, if you have one AMS, you need swap a spool during print. Best is to choose black and set the last color white on the same slot as the black

Start with lightblue

at layer 75 change to black

at layer 79 change to pink (for the ears)

at layer 82 change to blue

at layer 85 change to lightblue

at later 88 change to white

 

 

Have fun printing, and don't hesitate to share your makes.

 

Also go check my other models.

Comment & Rating (1)

Please fill in your opinion
(0/5000)

Print Profile
0.2mm layer, 2 walls, 15% infill
thanks
0
Reply
No more