本产品共有四个零件进行组装（需要胶水）

There are four parts for this product to assemble (glue required)

风扇部件底部打印时需要降速50%打印（因本人使用的是第三方PETG）大家如果有更好的打印方法可进行更改谢谢大家

希望大家多多支持该作者，记得点赞加收藏，本人后续对上盖与下盖螺纹组装更改成锁扣组装，希望大家多多支持。

When printing at the bottom of the fan part, you need to reduce the speed by 50% (because I am using a third-party PETG), if you have a better printing method, you can change it, thank you

I hope you will support me, remember to like and collect, I will change the thread assembly of the upper cover and the lower cover to the lock assembly, I hope you will support me.

1：将风扇与上盖组件安装，风扇正反无所谓；

2：是用胶水涂抹在顶部零件上与上盖顶部粘连；

3：下盖可放置一枚厚度8mm，直径17mm的香薰片；

4：将下盖与上盖拧紧即可。

1: Install the fan with the upper cover assembly, it doesn't matter whether the fan is positive or negative;

2: It is applied to the top part with glue and adhered to the top of the upper cover;

3: The lower cover can place a fragrance tablet with a thickness of 8mm and a diameter of 17mm;

4: Tighten the lower cover and the upper cover.