一个可以放在车内和办公桌上的装饰旗杆，可以安装自己喜欢的旗帜。旗帜可以使用3D打印制作，也可以使用纸打印。

A decorative flagpole that can be placed in the car and desk can install your favorite flag. The flag can be 3Dprinted with or printed on paper.

• 如果使用3D打印制作，需要把旗子的高度调整为80mm，厚度0.4mm，并在左侧加上如下图尺寸的部位用于安装到旗杆内部。
• If you use 3D printing to make flag, you need to adjust the height of the flag to 80mm, 0.4mm thick, and add the part in the figure below to install it inside the flagpole.

• 如果使用纸张进行打印，按下图尺寸打印。打印后将旗子对折并粘贴，左侧的空白处折叠几次直到可以塞入旗杆。
• If you print your flag on paper, print according to the size of the figure below. After printing, the flag need to be folded and pasted, the blank area on the left need to folded several times until the flag can be plugged into the flagpole.

可以按上述两种方法制作任意你想展示的旗子。

You can make any flag you want to show according to the above two methods.