Print Profile(3)
0.2mm layer, 2 walls, 5% infill
Designer
9 h
2 plates
0.2mm layer, 2 walls, 5% infill
5.8 h
1 plate
0.2mm layer, 2 walls, 5% infill max scale
11.6 h
2 plates
Open in Bambu Studio
Boost
176
258
59
21
358
191
Released
Description
Baby Groot with hollowed out head to become a planter.
Profile has 1-piece body and a 2-pieces body for you to choose from.
Comment & Rating (59)
All
Boosted
Printed great! I used the separated models and scaled it up 200%. Printed with Inland wood PLA. used some Plastic Wood putty to fill in some gaps and rough edges, including the seam at the neck. minimal sanding, just for the putty. stained with an Oak wood stain and then again with a dark walnut except for his face. Dry brushed some green paint on the top, black paint on the eyes, and a Modge Podge gloss over the eyes to make them pop! now I can’t wait for his plant to arrive in the mail!
The designer has replied
4
Reply
it looks amazing!!
0
Reply
Boosted
nozzle 0,4 ?
0
Reply
Boosted
Replying to @ca1nee
I did a .6 nozzle since it was a wood fiber PLA which is known to clog .2 and .4 nozzles.
0
Reply
Boosted
printed in max scale in 2 parts but the Supports break away . First time under the Fingers building the heart
second print Support breaking away under the skin .
need advice for perfect print ,please
The designer has replied
0
Reply
try the strong tree support. yours looks very slim
1
Reply
Printed in two pieces @ max scale on the X1C.
Head printed out just fine (see photo)
I too had the finger / heart fail - twice!!
First time I was using PETG as interface Support
Second time using the same PLA as the print.
I painted support Enhancers in Bambu Studio, now waiting for more two tone wood filament to try again.
If that does not work - I'll add designed support.
I'll upload the successful print profile - when I get it to work.
Great model - thanks you for sharing it!
1
Reply
Boosted
printed with remixed Design with base
1
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 5% infill
Probleme da die stützen unterhalb der Hände/Herz und Kinn abgebrochen sind.
Erst mit einer Veränderung der Stl Remix aus Base und unterteil gut druckbar.
Das von mir hochgeladene Remix wurde allerdings entfernt
The designer has replied
0
Reply
you might have adhesion issues. as for your remix model, please discuss it with MakerWorld as I do not have authority to decide why your model was removed.
I will reupload the model with stronger supports if that helps.
0
Reply
Boosted
Replying to @Boink
Nee ,warum soll ich mich streiten? Ich hab mein Modell gedruckt . Ist nicht wert sich darum zu streiten
0
Reply
Boosted
Replying to @Boink
momentan drucke ich mega detailgetreue Teile. Es wird eine Waffenplattform für w40k
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill max scale
made with wood pla. very stringy but thats due to the type of filament i used. came out very great!
2
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
Great model - I printed 2 @ 225% - thank you for sharing.
Support Issue! After a couple failed attempts on the bottom 1/2 - I finally use standard strong support pattern & PVA as the Support interface. PVA has 0mm distance from part since it dissolves away.
(Edited)
The designer has replied
0
Reply
that is huge!! thank you sharing your experience. i guess at higher sizes, the overhang is quite big
(Edited)1
Reply
Replying to @Boink
it’s done! with PVA supports.
0
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
I love this groot vase. perfect design for my moss and plant
2
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
definitely a show stopper
The designer has replied
0
Reply
Amazing paint work!!
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 5% infill
Perfect, printed in wood PLA best model ever
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
:)
(Edited)
1
Reply
Print Profile
0.2mm layer, 2 walls, 5% infill
what an awesome print
1
Reply
License
This user content is licensed under a
Creative Commons Attribution-Share AlikeRelated Models
© 2024 MakerWorld