Hi,
this is my design of printable ball joint.
Some details:
- Ball hole is 5.1mm
- Rod hole is 4.9mm (should be threaded with m5 tap for easy screw in.
- Rod hole length is 20mm
- Ball / housing spacing is 0.6mm
- No support needed
- Those settings worked best on Zortrax m200 with Z-Ultrat filament (ABS based)
Originally it was printed on Zortrax m200, using Z-Ultrat filament. Should work well with any ABS and ASA
Resolution:
0.14
Infill:
50%
Comment & Rating (5)