*Deadpool Wall Light 150cm+ long*
I created a glowing Deadpool wall logo for a good friend.
Each letter consists of an upper and lower part.
The hole in the middle is made for the cable.
The two parts fit together very precisely and hold together without glue or anything else.
Each letter has a 110cm long LED strip (I would recommend a little bit longer).
The LEDs are soldered in series and plugged in to the connector at the end.
I screwed the whole thing onto a C-rail to attach it to the wall and hide the cable.
!! The hole in the ‘P’ is not in the middle. !!
!! I printed it at 120% to fill out the bed. !!