Here is a multicolor fox planter/ nursery pot holder! Thiis can be used as a pot itself for smaller plant, or can be used to hold 4 inch nursery pots or smaller. The clear nursery pot shown is 3.5 inch, but his has also been tested with a 4 inch pot. This model requires no supports and prints flat on the build plat. This model also has drainage holes added to the 3MF file to prevent your plants from getting waterlogged and to help prevent root rot. If you are using it with a separate nursery pot, the drainage holes won't be necessary if you remove the nursery pot to water your plant. If you are wanting to print the STL file and would like to have drainage holes, they can be easily added in another program or in most slicers. The multicolor print takes a while, but is pretty “set it and forget it”. You can print this in PETG if you prefer, but I have not personally had any issues using PLA for outdoor planters.

I have been designing plant pots and planters for years now and I appreciate how insulating 3D printed pots are due to the air space between the outer walls and inner ones. Having that extra thermal protection can keep your plant's roots cooler and help keep the soil from drying out as quickly in dry environments. This particular pot also has a very wide base, which is very helpful in keeping plants from tipping over in the wind or being nudged.

If you have any issues printing this file, please let me know! It should be fairly straightforward, but I am here to help if you run into problems.