Ryu and his special attack!! Hadouken!!

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Blue Transmission Distance: 4
PLA+ SUNLU Blue Meta Transmission Distance: 6.4
PLA+ Sunlu White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue
At layer #12 (1.04mm) swap to Blue Meta
At layer #18 (1.52mm) swap to White for the rest.

Thank you