Description

Ever wanted an oversized Mewtwo card with Mewtwo popping out of the frame? Well now you can print one for yourself! This is another Hueforge hybrid print that uses filament painting methods and traditional 3D printing to create a combined pop-art effect piece. It's an easy 6 hour print, no supports needed!

This print uses 4 colours, with the White repeated for Mewtwo at the end. If you do not have an AMS, just insert pauses at the layer swaps and manually swap out the colours :)

It is large, at 177mm x 240mm in size. If you have to resize it to fit your printer bed, please only scale the X and Y dimensions, but do not alter the Z dimension, otherwise the layer swaps will be inaccurate.

If you are using the Makerworld One-Click printing, all settings will have been applied to this print, and you can just hit Print. If you do not want to use that, please download the 3MF file, or the STL and apply these settings below.

Print Instructions:

1. The Hueforge portion of the print should be printed at 100% infill, at a 0.08mm layer height with 0.2mm base.
2. The Mewtwo portion of the print (from 2.04mm to 210mm height) should be printed at 5% infill with 3 walls, and at 0.16mm layer height. You can use a layer height modifier to set these settings.

Filament Swaps:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PETG JAYO Black Transmission Distance: 0.4
PLA Overture Purple Transmission Distance: 1
PETG JAYO White Transmission Distance: 6
PLA Overture Yellow Transmission Distance: 10

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Purple
At layer #16 (1.36mm) swap to White
At layer #21 (1.76mm) swap to Yellow
At layer #23 Swap to white

Post Processing:

You'll need to paint Mewtwo's eyes yourself, but that shouldn't take too much time!