Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PETG JAYO Black Transmission Distance: 2
    PLA BambuLab Basic Red Transmission Distance: 6.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Jade White Transmission Distance: 4.2

!!!!  It appears you have mixed filament types.  Be certain this is what you want.  !!!!!

Swap Instructions:
    Start with Black
    At layer #4 (0.4mm) swap to Red
    At layer #11 (0.96mm) swap to Blue Gray
    At layer #19 (1.6mm) swap to Jade White for the rest.