Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Orange Transmission Distance: 4.9
PLA+ Sunlu White Transmission Distance: 5
PLA+ Sunlu Red Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Orange
At layer #8 (0.72mm) swap to White
At layer #14 (1.2mm) swap to Black
At layer #15 (1.28mm) swap to Red
At layer #19 (1.6mm) swap to Orange
At layer #21 (1.76mm) swap to White for the rest.