Simple two part holder to store 8 T-shaped hex wrenches together. The tool set contains the following sizes: 10, 8, 6, 5, 4, 3, 2.5 and 2 mm.

The model was designed with FreeCAD.

I inserted several neodymium magnets in the holder (see photos). 8 round 10 mm x 2 mm for keeping the wrenches in the holder and two larger round 10 mm x 5 mm ones, to attach the two parts together. When inserting the larger magnets be aware of the polarization, they have to attract the other side and not repel.

The holes for the wrenches were quite tight in the beginning. They do get a little looser, though, after a few times of moving the tools in and out. So, after 20 times, the holes are perfect. I am not convinced, if the smaller magnets are really necessary, but they are embedded in the parts now… ;-)

You need:

• 8 round 10 mm x 2 mm neodymium magnets
• 4 round 10 mm x 5 mm neodymium magnets

The pre-sliced 3MF files have a pause added on the height of 20.2 mm to insert the magnets.