This spool adapter is a simple ring to fit the 0.5kg eSun spools in the AMS and extend them to a 1kg full size spool. Optimal if you use respool filament or you want to rewind filament from other spools.

Simply print the part with supports in the heavy or light version (both are stable enaught) and use longer bolts. Please note that the M6x55mm bolts on the head must be turned down to diameter 8.8mm (from approx. 9.8mm for M6) or exchanged for M5 bolts and nuts.

Please like and probably leave a make if you want.

Nozzle-diameter: 0,4mm or 0,6mm and easy over 0,2mm layer height

Material: If you want to use the spool for drying high temperature filaments, you should consider the temperature suitability of the filament from which the part will be printed

Please feel free to cantact me for improvements or notes.