4 colour
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Black Transmission Distance: 0.3
PLA BambuLab Brown Transmission Distance: 1.5
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #4 (0.4mm) swap to Brown
At layer #9 (0.8mm) swap to Red
At layer #10 (0.88mm) swap to Yellow
At layer #12 (1.04mm) swap to Jade White for the rest.