Hi all,

i'm back with a wall art wit open top layer design. This desings are made for printin on all printers.

More of this Pokémon hexagon are coming soon.

Check Pickachu HERE

Instruction for the open top layer: The screenshots are from a other model but the steps ar the same, only some parameters changes. (the setting are set in the 3mf)

• In global tab choose the Octogram Spiral infill en enable supports
• Go the the object tab; i used the Height range modifier (Right click on the object in the object tab)

That way Pikachu closed top layer

Choosing other infill is also possible (Archimedean Chord did'nt work for me)

• Set the layes you want to change; in this case it's 0 to 15 mm

• In the object tab set top layers to 0 and infill to Octogram Spiral

Dont forget to do the color swaps. PAY ATTENTION IF YOU USE 1 AMS; This is a 5 color print, if you have one AMS, you need swap a spool during print. Best is to choose black and set the last color red on the same slot as the black

Start with LIGHTBLUE

at layer 75 change to black

at layer 79 change to lightblue

at layer 82 change to yellow

at layer 85 change to orange

at later 88 change to red

Have fun printing, and don't hesitate to share your makes.

Also go check my other models.