Screw-Lock Carabiner
There are many different Shapes.
Each one comes with a "print in place" joint and a screwlock / nut.
The cross section is octagonal.
I will add more shapes and locks in the future.
Everything was created with TInkercad.
Print settings
Layer height: 0.1mm
First layer: 0.2 mm
Infill: 50% or higher
Brim for main model: Use an outer brim with 0.15 mm object gap.
Brim for lock / nut: Use an inner brim with 0.15 mm object gap.
Print orientation: print with the original orientation
Resize: I dont reccomend it at the moment
Ps. I inverted the screw-orientation :P
<<< Have fun! >>>
Update Log
10.04.24:
11.04.24
13.04.24