这是一款针筒式润滑油涂抹工具，将涂抹丝杆、光轴润滑脂变得更加简单，考虑到获取针筒需要额外购买的不便，我设计了一体式的针筒式润滑脂涂抹器，希望对你有所帮助！！

如果您发现模型打印出来后，推进器和针筒之间有间隙，请不要担心，由于润滑脂的特性，在推进过程中，它不会从间隙中溢出。我已做过多次测试！

但是假如你恰好有一个针筒，不需要一体式设计的润滑脂涂抹工具，那么我的另一款设计可能适合你，它精致小巧，打印仅需18分钟（含准备时间），只需将它套在针筒头上即可使用，如果您想了解，这是链接：P1S X1C A1 Lube helper 丝杆润滑工具 来自 EricYC - MakerWorld

This syringe-type lubricating oil applicator tool simplifies the process of applying lubricating grease to screw rods and optical axes. Considering the inconvenience of having to purchase a separate syringe, I have designed an all-in-one syringe-type lubricating grease applicator, hoping it will be helpful to you!

If you find that there is a gap between the thruster and the syringe after printing the model, don't worry. Due to the characteristics of lubricating grease, it will not leak out from the gap during the thrusting process. I have conducted multiple tests!

However, if you already have a syringe and don't need an all-in-one lubricating grease applicator, then perhaps my other design might suit your needs. It's sleek and compact, taking only 18 minutes to print (including preparation time). All you need to do is attach it to the head of your syringe, and you're ready to go. If you're interested, here's the link:P1S X1C A1 Lube helper 丝杆润滑工具 来自 EricYC - MakerWorld