I designed this planter/Designer lamp in fusion 360 with style and modern art in mind, the size is 11,5 x 11,5 cm by a total height of 12,4 cm .

The feet are designed to fit snug in the bottom of the planter but you could use some glue to fix them.

I made the file so you can print the support with PLA/PETG combination.

The flushing volumes are set to 800 to make certain the materials do not get mixed with adhesion problems as a result.

You can use your own colours in slots 1&2 for PETG and slot 4 for PLA support.

It is set up to print the model in PETG and use PLA ( slot4 ) for a support interface so the design gets nice supported elements for great fitting and should be easy to print and easy to remove the supports afterwards.

I hope you enjoy the model and if you run in to trouble please let me know so i can help.

If you would like to print the model in PLA change the interface material to slot 1 or 2 with the PETG profile as showed in the foto, it is now setup for PLA support with PETG for printing the model.