The Final Installment of these robots who desperately needed a break.
Painting with filaments using Hueforge!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm
Filaments Used:
PLA Black Transmission Distance: 2.4
PLA Purple Transmission Distance: 2.4
PLA Pink Transmission Distance: 5.5
PLA Yellow Transmission Distance: 4
PLA White Transmission Distance: 4.8
Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Purple
At layer #9 (0.88mm) swap to Pink
At layer #13 (1.2mm) swap to Yellow
At layer #19 (1.68mm) swap to White for the rest.