The Fish Line Disposal is designed to allow easy and convenient disposal of fishing line. Simply hold the line against the opening and rotate the knob and your fishing line will be “sucked” in. After the device is full, just remove the inside by pulling from the knob and emptying it into the garbage.
Assembly:
The assembly is quite simple.
- Print the parts.
- Use a knife to carefully cut a slit down the support of the inner part (See Image Below).
![](https://makerworld.bblmw.com/makerworld/draft/833832/2024-04-08_6887666436ccf.jpg?image_process=format,webp)
- Use flush-cut pliers to cut the inner spokes from the outer (See Image Below), rotating after each column.
![](https://makerworld.bblmw.com/makerworld/draft/833832/2024-04-08_28fffda552354.jpg?image_process=format,webp)
- Press the inner part into the outer until it snaps into place. Rotate it back and forth a couple of times until it rotates freely.
- You're done, now go fishing.