An interlocking desk or wall display that comes in multiple sizes and can display Baseballs, Golf Balls, Pokeballs and other circlar sized items. This system hides the key slots for a cleaner display with minimal seem lines.

Set up your display any way you'd like. Light weight but sturdy, print in any color without supports. For a perfect “honeycomb” look you'll need to print all of the same size for all pieces, as well as the Center display for the middle slot, in order to interlock the top piece. If you need multiple sizes, all Female to Male key slots will fit together.

How to interlock: Start from the bottom and interlock two at a time, turning in a 30-45 degree angle and twisting back to snap the top and bottoms together. Once all are

To remove edge or any Key slots for a cleaner edge display, do the following:

1. Download Autodesk Meshmixer (Free)
2. Import model to edit into meshmixer
   1. Import (plus button) on left navigation bar
3. Once imported click Select (arrow button on left navigation bar)
4. Select the top Key slots you want removed
   1. will highlight a certain color (mine turn orange when selected)
   2. may need to change brush size to only select the specific key slots
5. Click Deleted (on keyboard)
6. Export STL Binary Format
   1. Label as you need for reference

To find the larger Funko and action figure hex displays go here: https://makerworld.com/en/models/420032#profileId-322737