With this bottle cutter you can create strips to make your PET1 filaments. The cutting is performed by a modeling hobby scalpel blade, as shown in the picture.
The necessary materials are:
It's recommended to glue the M10 nut into its housing.
It's also advisable to secure the bottle cutter to a small wooden board with M3 or M3.5 screws and to use the BottleWeight on the bottle neck while cutting (I filled mine with sand and sealed it with silicone glue). You can use also an empty spool with some extra weight.
I've added spacers of various sizes, but if you want to create them yourselves, simply extrude the base and change the number.