If you like this model and find it useful, you can support me in creating more by clicking on the Boost button above.

NOTE: I have uploaded STEP files of all models. To access them  you just have to click on “Download or Print”, and then the REALLY badly labelled "Download STL" and it will show the raw model files, which are all STEP.

UPDATE: Requested new variant added (SD Card Slide Holder 5X1+SIM) with SIM removal tool and SIM card adapter.

This Micro SD card / SD card holder holds a multitude of cards in a thin light and secure package, with a small detent that ensures that cover cannot accidentally open and release your precious data!

There is also the ability to add a key ring hook that ensures that the cards cannot come out while also allowing the whole unit to be tethered.

This Micro SD card / SD card holder should print on pretty much any printer, and there are multiple configurations to satisfy most storage requirements.

Any material should be fine for printing, I used PLA in testing and had no issues.

I recommend a layer height of 0.2mm or lower using a 0.4mm nozzle, all other wall and infill settings can be left default.

When importing one of the step files, follow these steps:

• Import step file to blank project.
• Split step file to objects in your slicer,
• Orient the top piece (Without the holes) so that the top surface lies on the build plate.

I have attached 3MF project files with this already done to save time.

Naming of the files gives the number of Micro SD and SD with examples as follows:

SD Card Slide Holder 18x2 (18 Micro SD cards, 2 SD cards)

SD Card Slide Holder 10x1 (10 Micro SD cards, 1 SD card)

SD Card Slide Holder 4x1 (4 Micro SD cards, 1 SD card)

SD Card Slide Holder 4x0 (4 Micro SD cards, 0 SD cards)

SD Card Slide Holder 5X1+SIM (5 Micro SD cards, 1 SD card, 1 SIM Card Adapter, SIM Removal Tool Pocket)

If there are any others sizes or configurations that are required, please leave a comment and I will generate it and add to this project.