Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
I had walls at 2 not sure if thats correct.
Filaments Used:
PLA Overture White Transmission Distance: 4.4
PLA Overture Black Transmission Distance: 0.7
PLA Overture White Transmission Distance: 4.4
PLA Overture Black Transmission Distance: 0.7
Swap Instructions:
Start with White
At layer #7 (0.64mm) swap to Black
At layer #8 (0.72mm) swap to White
At layer #9 (0.8mm) swap to Black for the rest.