The classic Ford logo. I don't recommend changing any settings,.. just load the correct colors and hit print.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 2
PLA BambuLab Matte Ice Blue Transmission Distance: 3.4
PLA BambuLab White Transmission Distance: 6
Swap Instructions:
Start with Dark Blue
At layer #7 (0.64mm) swap to Marine Blue
At layer #12 (1.04mm) swap to Ice Blue
At layer #18 (1.52mm) swap to White for the rest.