When I placed my AMS a bit further away I searched for some PTFE guides to make sure that the tubing stays in a good shape with as little frictions and unnecessary curvature as possible. To my surprise I found great prints for the curvature parts, but nothing to guide it in a straight line along the wall or on the back of the furniture.

So I created this little set that is tested with the PTFE tubing from the Bambu Store. They're 25cm segments in 3 different versions.

Basic = Just the simple guide to tape or glue it in place
Screws = same as basic, but 3mm higher with 5 holes for screws

Magnets= same as basic, but 3mm higher with 7 holes for 6x2 or 6x3mm magnets