Bottle opener by Haix3D

Haix3D

Tools>Other Tools

Print Profile(2)

All

X1 Carbon

P1S

P1P

X1E

0.16mm layer, 4 walls, 30% infill

Designer

34 min

1 plate

5.0(13)

0.16mm layer, 4 walls, 30% infill

Designer

56 min

1 plate

4.4(17)

Open in Bambu Studio

Boost

198

178

Released

Description

The next bottle opener.

Due to the small wings, the opener has more grip and does not wear out so quickly.

You dont need any Support Structures. Except a brim

Comment & Rating (33)

@garywood75

Came out great, although 2 of them fell over on the last few layers!, my fault, will print again.

@ceaddl

Print Profile

0.16mm layer, 4 walls, 30% infill

Profile worked great, I printed them in eryone sparkly black PLA, no issues.

@JASAA3D

Print Profile

0.16mm layer, 4 walls, 30% infill

My hangover thanks you 😊

@garywood75

Print Profile

0.16mm layer, 4 walls, 30% infill

i need to try again, 2 printed ok, 1 failed,but also 1 of the 2 split on first use

@marian.huebner

Print Profile

0.16mm layer, 4 walls, 30% infill

Great practical Design - 3mf works nice

@StoneCut

Print Profile

0.16mm layer, 4 walls, 30% infill

Bambu Studio complained about the objects being too close to each other and one did actually get knocked over, too. Apart from that - nice model. Thanks for sharing.

@HdSPerformance

Print Profile

0.16mm layer, 4 walls, 30% infill

The designer has replied

@Mr.Haix

@HdS Performance I'm sorry that you don't like the print profile. I would be interested to know what exactly the problem was so that I can possibly make adjustments.

@HdSPerformance

Replying to @Mr.Haix :

Several errors occurred, the first error was that the nozzle moved into the print bed despite automatic bed leveling. The layer height was probably too low for the first layer. During printing, one of the openers was torn off the print bed, presumably because the printing speed was too high. The material used was polycarbonate from Polymaker.