A beautiful drawing of a Japanese landscape.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 151x151mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Sunlu Blue Transmission Distance: 4
    PLA+ Sunlu Red Transmission Distance: 6
    PLA+ Esun Yellow lite Transmission Distance: 10
    PLA Sunlu Meta Blue Transmission Distance: 5.7
    PLA+ Sunlu White Transmission Distance: 5
This print uses 6 unique filaments

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Blue
    At layer #11 (0.96mm) swap to Red
    At layer #12 (1.04mm) swap to Yellow lite
    At layer #15 (1.28mm) swap to Blue
    At layer #19 (1.6mm) swap to White for the rest.
 

Thank you.