This is a hueforge print of Streetfighter's Ryu, with only 4 colors: Black, White, Grey and Red
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA smartfil Black Transmission Distance: 0.4
PLA smatfil cold White Transmission Distance: 4
PLA smartfil greyTransmission Distance: 0.8
PLA smatfil redTransmission Distance: 2.3
Swap Instructions:
Start with black
At layer #10 (0.88mm) swap to cold White
At layer #17 (1.44mm) swap to grey
At layer #23 (1.92mm) swap to red for the rest.