A holder for shower bottles and towels on a glass door/wall.

At first I designed this to work with a holder I got from Amazon (which originally was supposed to be double side taped to the wall, that didnt work to say the least) so the photos are with that part fitted on the glass.

But, I thought it would be a good idea just to make my own bottles holder and made it to fit the BAMBU print bed as the holder spans 250mm wide.

This design uses some clever design elements combining a French Cleat and a Dovetail to hold the pieces together except the bottles holder which needs hardware, all listed hardware are in the explanation image.

but for you tldr;

• M4X14 screw and an M4 nut (nut is captive in the model, pause at height operation is added to the print profile, @Z-height of 5.20, or layer 58 if you are printing @ 0.20mm height).
• 12 x M3 heat inserts (max. height 6mm) -AND- 12 x Allen M3 Machine screws (min len. 14mm max len. 20mm)

Note: This was designed for a 6MM tempered glass door! If you have a thicker glass please leave a comment and I will upload a thicker piece for your required size :)

Happy Printing! :)