Hueforge - Star Wars - Posing Storm Troopers by Cloudy Nostalgia

Cloudy Nostalgia

Generative 3D Model>Hueforge & Lithophane

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

0.08mm layer, 2 walls, 100% infill

Designer

5.5 h

1 plate

5.0(4)

Version 2.0

Designer

5.6 h

1 plate

5.0(2)

Open in Bambu Studio

Boost

Released

Description

How to support me!

If you like my work, consider joining my Patreon where you can have a say in what I print next! Only Patreon members get to see those items and you can even sell them at a certain tier. Finally, if you’d like to learn my tips and tricks for making a hueforge start to finish I offer a coaching session to some of my patreons! Thank you for all your support!

www.patreon.com/CloudyNostalgia

Also, if you have any questions about how to print a piece of mine or if you need help troubleshooting, feel free to join my discord server where you can ask for help!

https://discord.gg/4ays78UJ

Also, I upload videos every so often showing how to videos for Hueforge. If you’d like to view here is the link:

https://www.youtube.com/channel/UCG1IDrymVjUyYng7nXrdGnw

**IMPORTANT INFORMATION**

You cannot adjust the z scaling on any hueforge. This will mess with the coloring done and your hueforge will not come out as intended. You can however change the x and y to scale the picture. I recommend only changing by the same percentage.
To get an accurate print as shown in the photos you MUST use the same filaments listed below. You can change brands (as long as they are similar) but keep the filament colors the same. If you use any other color, you will not get the same results as me.
What you see in the slicer will not be how the final results will look! Hueforge takes advantage of color bleed to make the blended colors!

Original Version

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA Sovol PLA White Transmission Distance: 3

Swap Instructions:
Start with Black
At layer #21 (1.76mm) swap to Gray
At layer #28 (2.32mm) swap to White for the rest.

Version 2.0

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
    PLA BambuLab Basic Black Transmission Distance: 0.6
    PLA BambuLab Basic Blue Gray Transmission Distance: 3
    PLA BambuLab Basic Gray Transmission Distance: 2
    PLA BambuLab Basic Jade White Transmission Distance: 3.5

Swap Instructions:
    Start with Black
    At layer #17 (1.44mm) swap to Blue Gray
    At layer #23 (1.92mm) swap to Gray
    At layer #28 (2.32mm) swap to Jade White for the rest.

Comment & Rating (16)

@jason.matusiak

came out great. feels like a missed opportunity to make JUST the lightsabers colored though. otherwise, beautiful!

The designer has replied

@cloudynostalgia

I can try but making those only pop would be very difficult! Ill keep you posted though! Ill give it a try today! happy you liked the print otherwise!

@jason.matusiak

Replying to @cloudynostalgia :

it is easy for me to complain, but I totally get it's a lot harder to actually do! you made it onto the wall at work today

@cloudynostalgia

Replying to @jason.matusiak :

haha no no don’t worry you are right that image would go to another level with that color! and heck yes!!! my first wall ! (that’s a very nice wall btw)