Yes, I know, another HueForge model... But this is about Cowboy Bebop!
The pieces are separated by color, but together they form a poster.
Below are the printing information for each panel.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

"CowboyBebop HF - blue_Front_107x126_S_C.stl"

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Esun Blue Transmission Distance: 5
    EPLA-ST Esun White Transmission Distance: 16

Swap Instructions:
    Start with Black
    At layer #8 (0.72mm) swap to Blue
    At layer #20 (1.68mm) swap to White for the rest.

“CowboyBebop HF - green_Front_140x113_S_C.stl”

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Elegoo Green Transmission Distance: 9.2
    EPLA-ST Esun White Transmission Distance: 16

Swap Instructions:
    Start with Black
    At layer #12 (1.04mm) swap to Green
    At layer #20 (1.68mm) swap to White for the rest.

“CowboyBebop HF - red_Front_89x200_S_S.stl”

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Esun Red Transmission Distance: 5.4
    EPLA-ST Esun White Transmission Distance: 16

Swap Instructions:
    Start with Black
    At layer #9 (0.8mm) swap to Red
    At layer #19 (1.6mm) swap to White for the rest.
 

“CowboyBebop HF - white_Front_140x87_S_C.stl”

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    EPLA-ST Esun White Transmission Distance: 16

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to White for the rest.
 

"CowboyBebop HF - yellow_Front_121x126_S_C.stl"

Filaments Used:
    PLA+ Sunlu Black Transmission Distance: 0.6
    PLA+ Esun Yellow Transmission Distance: 7.3

Swap Instructions:
    Start with Black
    At layer #7 (0.64mm) swap to Yellow for the rest.

I hope you enjoy it!

SEE YOU SPACE COWBOY…