3D print your own Bumblebee Girl figure made from 500% scale replica of popular toy bricks.
An AMS is required to print this figure. It is recommended to use the print profile I have provided to print this model. I can't guarantee that you will achieve the same success I have, but after several test prints and trial and error, I know this to work. I also recommend printing on a smooth surface PEI plate so your pieces are not textured.
The print profile is separated by plate for efficiency with printing time and material. You can use whatever filament you have on hand, but I used:
Bee Costume:
Bumblebee Girl Face
The print profile is set up to print two wall loops and 10% infill on Gyroid, however you can tweak to your liking.
Again, I recommend the settings I have in the Print Profile. You may need to enable supports by object. I have added manual supports to the overhangs that are critical. Some may need needle nose pliers to be removed.
Happy Printing and Enjoy!
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.