The cats in the tree

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA HS GRATKIT Black Transmission Distance: 0.3
PLA Matte E-SUN Gray Transmission Distance: 2.5
PLA GRATKIT Gray Transmission Distance: 3
PLA HS CRATIVE White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Gray
At layer #13 (1.12mm) swap to Gray
At layer #18 (1.52mm) swap to White for the rest.

Enjoy