Basic information
Thisi is a case for the DC 12V PWM Fan speed controller, chinese made.

Files information
I've included 1 file in .3mf format

Material
PLA

Layer height
0,2 mm

Infill
>15%

Scaling
No advised if you are using for the same regulator as mine.

Orientation
Default, laid flat on the base

Adhesion aid
If your printer suffers from poor buildplate adhesion, consider using some kind of adhesion booster, such as adhesive spray or glue. The contact area is fairly small, and the print might detach otherwise.

Other info
Tested and prints great on P1 Series.
0.12 high quality setting, initial layer 40 mm/s; initial layer fill 90mm/s