Hello, I saw your profile and appreciated it! But prevent from low lift rate and stall situations, can you upload the single wall &amp;  %5 gyroid infill profile? Thanks! 

inosh

I am about to start a build of this. I have created a Bambu Compatible Project and will upload the project once I verify everything prints fine.

NFalcon

how does this fly. it seems way too heavy 

Driver956

i  am about to print this, thought that i could make some dream of mine

user_1808737922

cover

IMG_0211_a35fefea-eae5-4b9e-b2f5-771bb33f7bb7.webp

plate_1.png

plate_2.png

plate_3.png

plate_4.png

plate_5.png

Following original Directions, all prints was 1 wall 8% Infill. Using AMS with PLA Black and PETG Red for interface material.Some notes, due to 1 wall and PLA material the model was very fragile, pretty sure it would not survive a landing. Suggestion would be try AMA for better strength, and proper interface Support material.&nbsp;

0.2mm layer, 2 walls, 15% infill

A 900mm RC Plane.&nbsp;Print with %3-5 gyroid infill and single wall at 0.4mm.&nbsp;I&#39;m using x2814 motor. You can use same size motors. &nbsp;

Print Profile(1)

Description

Comment & Rating (4)

License

Related Models

glider plane

Paper Plane / Papier Flugzeug

Aerodinamic plane propeller with a 3 mm hole

Japanese 1:10 License Plate

900MM RC Plane