A simple rotating turntable, for example, for photography or video recording. The base measures 10x10cm, the turntable has a diameter of 14cm. Everything is powered via a USB port. The motion is provided by a small yellow motor with a gearbox, and its speed is then controlled by a PWM motor speed regulator (max 2A).

Attach the motor with the gearbox to the base box using 2x M3-25 screws with a countersunk head. It is ideal to secure it with the help of self-locking nuts (it is not important, you can use ordinary ones) M3. The motor regulator is then inserted into the wall, after securing it with the nut that is included, put on the plastic cover of the potentiometer (either original or printed). Cover the lower part of the box with a lid, where with the help of an M3-20 screw (again with a countersunk head) attach the feet and the lid to the main part of the box. Insert 4 pcs of M3 nuts into the upper part of the box from above beforehand, if there is a problem, use the technique of pulling in the nuts with the help of a screw (using the M3-40 screw, for example).
Before completing the box, I recommend that you check that everything is well connected, keep the +/- on the regulator input.
---

Two types of turning platform can be used. One directly printed with protrusions for balancing, or the other using 624 bearings and 4x M4-10 (or M4-16) screws screwed through the bearings directly into the plastic. (see pictures)
(Shoppinmg list include)
***************
Jednoducha otaceci tocna kuprikladu pro fotografovani nebo nataceni videa. Zakladna o rozmerech 10x10cm, tocna pak o prumeru 14cm. Vse je pohaneno pres USB port. Pohon zajistuje maly zluty motor s prevodovkou a jeho rychlost pak PWM regulator otacek motoru (max 2A).

Do zakladniho boxu pomoci 2 sroubu M3-25 se zapustnou hlavou se uchyti motor s prevodovkou. Idealni je zajisteni pomoci samojisticich matic (neni podminkou daji se pouzit i obycejne) M3. Do steny se pote vlozi regulator motoru, po jeho zajisteni pomoci matice, ktera byva soucasti, nasadte plastovy kryt potenciometru (at uz original nebo vytisteny). Box pote zakryjte ve spodni casti vikem, kde pomoci sroubu M3-20 (opet se zapustnou hlavou) pripevnite nozicky a viko k hlavni casti boxu. 4ks matice M3 si predem vlozte do horni casti boxu zhora, pokud by byl problem, pomozte si technikou vtahovani matic pomoci sroubu (pomoci sroubu M3-40 kuprikladu).
Pred kompletaci boxu doporucuji vyzkouset ze je vse dobre zapojene, u regulatoru dodrzte na vstupu +/-.
---
Je mozne pouzit dva typy otaceci platformy. Jedna primo vytistena s vystupky kvuli balancovani, nebo druha pomoci lozisek 624 a 4x srouby M4-10(or M4-16) zasroubovane pres loziska primo do plastu. (viz obrazky)

(Nakupni seznam prilozen)