Seed Starter Tray
_______________________________________________
About:
Simple seed starting tray. Scale it to whatever size suites you. We are starting some Sugar Baby watermelon seeds.
____________________________________________
Steps To Print:
- Suggest printing the base in black to capture heat
- The cover should be clear printed in spiral vase mode (white filament may also work)
- cover will warp but it should still work
- Disable cooling fan to reduce warpage and get a clearer part
- hotter temps seem to result in clearer part
____________________________________________
Dimensions + Print Time + Filament Used:
- 200mm long
- 155mm wide
- 100mm tall
- 5 hour print time
- 220g of filament used
____________________________________________
Settings:
BASE:
- Layer height:0.28mm
- Walls: 2
- Top shell layers: 4
- Bottom shell layers: 3
- Infill: 15%
Cover:
- Layer height:0.28mm
- Print in Spiral Vase mode
- Recommend higher than normal temp with clear filament to make it more see through.
- Disable fan
- White filament would also probably work
_____________________________________________
Extra:
More Cool Prints:mwiller | Published - MakerWorld