Airsoft Modular Toy Suppressor V4 Baffled/Hollow
Copyright Claim
Airsoft Modular Toy Suppressor V4 Baffled/Hollow
Boost
5
12
8
Print Profile(2)
0.2mm layer, 2 walls, 10% infill
Designer
4.3 h
2 plates
0.2mm layer, 2 walls, 10% infill
Designer
2.5 h
2 plates
Open in Bambu Studio
Boost
5
12
8
2
22
6
Released
Description
Version 4 of a toy suppressor that can be used with the baffles included or foam inserted. Made this one much MORE SIMPLE. CCW threads for 14mmx1 threaded barrels. First time threading the barrel go slow and easy and make sure to back off one turn for every turn you make to clean the threads. For those of you using bambu printer the file is ready to print.
Those of you using a different printer grab the stl from raw files. Supports are only needed on outer shell at the top and top of locking mech. On the baffle supports are only needed for the bottom overhang otherwise it prints fine with out supports.
Comment & Rating (8)
All
Print Profile
0.2mm layer, 2 walls, 10% infill
Fit a little tight on the threads, but made it work. looks amazing with the profile provided. great work on the file!
The designer has replied
0
Reply
Thank you so much. I should add to documents. That you need to use the 1 twist on 1 twist back method to debur the threads. Have to thread on and back off on each turn then it’ll go on smooth every time.
0
Reply
Im thinking of making a bunch of other interchangeable parts that just clip on if you have any ideas would love to hear them!
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
scale was off
The designer has replied
0
Reply
scale was perfect for me its most likely your settings or machine. You can scale the threaded part 2% and it should help.
0
Reply
Print Profile
0.2mm layer, 2 walls, 10% infill
Easy print!
0
Reply
can you make one file for a1 mini
0
Reply
Boosted
Print Profile
0.2mm layer, 2 walls, 10% infill
0
Reply
No more
License
This user content is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld