Mount for Icom ID-4100.
v1 - It works so unless I find some flaws as I use it I don't suspect I'll revise it. There is about 1mm gap from the radio on each side. Using 4 m4x8 screws I was able to cleanly attach the radio.
There are 4 mounting holes for screws. There are also 4 holes for running zip ties (if you want something more temporary or don't want to drill.
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.2
Infill:
25%