Decorative small signs for the desk and not only by Nirolfix

Nirolfix

Art>Signs & Logos

Print Profile(4)

All

A1 mini

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 10% infill

Designer

22 min

1 plate

5.0(1)

0.16mm layer, 2 walls, 10% infill

Designer

10 min

1 plate

0.16mm layer, 2 walls, 10% infill

Designer

23 min

1 plate

0.16mm layer, 2 walls, 10% infill

Designer

22 min

1 plate

Open in Bambu Studio

Boost

Released

Description

Several small signs with some famous sayings in Latin and English provided with their "feet".
The feet is provided in a separate STL file and should be printed with brim.

Sign Dimmesions: 80x35x4mm

Print parameters:

Layer height - 0.16mm
Perimeters - 3
Infill - 10% is sufficient (infill type doesn't matter)
Brim - NO for the sign, YES for the feet
Support - NO
Raft - NO
Place on face - horizontally on the back face of sign/feet
Filament type - PLA

Could be printed even in multicolor without AMS, MMU, or similar.

For multicolor print:

When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 16 and then change filament
When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) and then change filament

You can increase dimmesion at will but pay attention if you want to print in multicolor, this will change the layer number when you must put the printer in Color Change mode(G-code M600).