Print at 10% infill with a layer height of 0.2 mm with a base layer of 0.2 mm

Filaments Used:
PLA Violet
PLA Green
PLA Light Green
PLA Pink
PLA Light pink

PLA Silk Blue-Green
PLA White

Swap Instructions:
Start with Green
At layer #5 (1.00mm) swap to Light Green
At layer #9 (1.80mm) swap to Green
At layer #13 (3.20mm) swap to Light Green
At layer #17 (4.20mm) swap to Blue-Green
At layer #21 (5.20mm) swap to Violet

At layer #25 (6.20mm) swap to Pink

At layer #29 (7.20mm) swap to Light Pink

At layer #33 (7.20mm) swap to Violet

At layer #37 (7.20mm) swap to Pink

At layer #41 (7.20mm) swap to Light Pink

At layer #45 (7.20mm) swap to White for the rest.

The image has 12 layers, original size 200 mm x 200 mm x 9,6 mm

Frame:

Design for non-commercial prints only!!!